>
Latch Replacement - Liftgate
Removal Procedure
Here is a breakdown to help you.- Remove the liftgate garnish molding (1). Refer to Garnish Molding Replacement - Liftgate .
- Remove the control rods from the actuator lever (2).
- Remove the liftgate latch screws (6).
Images available only to Customers.
- Remove the slide latch (4) from the liftgate.
- Remove the control rod from the liftgate.
- Remove the control rod from the liftgate latch.
Images available only to Customers.
Installation Procedure
- Install the latch (4) with the control rod to the liftgate (3).
Notice
Refer to Fastener Notice in Cautions and Notices.
Images available only to Customers.
Important
Install the new retainers whenever the control rods are removed.
- Install the liftgate latch screws (6). Tighten
Tighten the liftgate latch screws to 10 N·m (88 lb in).
- Use the following procedure in order to install the control rods to the actuator lever (2):
- Push the actuator lever and the control rod together (2).
- Push the control rod through the hole.
- Install the liftgate garnish molding (1). Refer to Garnish Molding Replacement - Liftgate .
Images available only to Customers.
Edited by johnbenn on December 26 2005 at 8:06pm
__________________
If my info has helped you in any way please hit the accept button, and remember bonuses/tips are always nice. If you have any further questions don't hesitate to ask. Thank you.
