- Remove the turn signal/hazard relay (A) from the under-dash fuse/relay box (B).
- Inspect the relay and fuse/relay box socket terminals to be sure they are all making good contact.
- If the terminals are bent, loose, or corroded, repair them as necessary, and recheck the system.
- If the terminals look OK, go to step 3.
- Make these input tests at the fuse/relay box.
- If any test indicates a problem, find and correct the cause, then recheck the system.
- If all the input tests prove OK, the turn signal/hazard relay must be faulty; replace it.
Images available only to Customers.
Images available only to Customers.
I hope this helps. Please click the
Accept button to close the question.