If the cable came apart it does not go back together the regulator will have to be replaced.
- Remove the front door trim panel.
- Remove the front door water deflector.
- Raise the front door window far enough in order to gain access through the inner door panel to the window to regulator bolts (2).
- Remove the bolts from front door window to regulator.
- Raise the front door window to the full up position.
- Tape the front door window in the full up position.
- Disconnect the electrical connector.




View Full Image 
- Remove the bolts from the front door window regulator and motor.
- Remove the front door window regulator from the front door.
__________________
PLEASE -Remember that your Expert will not be paid until you accept an answer and complete the process. Please leave "FEED BACK".

