Just Answer Just Answer
Ask A Question  -  Help  -  Register  -  Login   

Ask Your Car Question. Car Experts Answer You ASAP
(Not a Car Question?)

Question

How do I change the lamps in the headlights on a 2007 ...


Sent to Car Experts August 19, 2006 10:57 a.m.
How do I change the lamps in the headlights on a 2007 GMC Yukon Denali?

Optional Information:
2007 GMC Yukon Denali 6.2

Already Tried:
Removed the two (2) bolts on top of the headlight assembly but could not figure out how to get the rest of the assembly loose.
Customer (name blocked for privacy)
Status: Closed   Value: $9   
Answer
August 19, 2006 11:44 a.m. (46 minutes and 41 seconds later) 		ACCEPTED Check Mark
You will have to pull pretty hard to get it the lens off.

Headlamp Replacement (Yukon)


Object Number: 1669958 Size: SF
View Full Image

  1. Remove the 2 forward wheelhouse liner screws.
  2. Remove the 2 washer container push pins.
  3. Open the hood.
  4. Remove the 6 upper fascia bolts right to the hood latch mechanism.
  5. Remove the lower rear fascia bolt from the support bracket.
  6. Loosen the 2 fascia to fender bolts from under the fascia.
  7. Pull the outboard end of the front fascia straight outboard until it disengages from the fender attachment bracket.
  8. Pull the fascia forward and downward to allow enough clearance to remove the headlamp assembly.
  9. Loosen the lower outboard attachment bolts.
  10. Remove the 2 upper headlamp bolts.
  11. Grasp the headlamp at the upper inboard and lower outboard side and pull the headlamp forward to disengage the locating tab.
  12. Pull the outboard side of the headlamp forward until the 2 locating pins disengage from the radiator support.
  13. Disconnect the forward lamp harness connector.


__________________
Master ASE Certified.L1 Advanced Engine Performance Certified.Pa Emission Repair Technician.Just Answer Car Category Mentor.
PictureDavo  -- Master technician -- 100% Positive Feedback on 1860 Car Accepts
ASE Master Technician/Advanced Automotive Diagnostic Technician
Reply to Davo
Sent August 19, 2006 11:56 a.m. (12 minutes and 33 seconds later)
Thank you very much. No easy task anymore.

Do you happen to have access to have drawings of the facia area with the pins shown that need to be removed?

Edited by Customer (name blocked for privacy) on August 19 2006 at 12:01pm
Customer (name blocked for privacy)
Answer
August 19, 2006 12:04 p.m. (8 minutes and 11 seconds later) 		ACCEPTED Check Mark
Object Number: 1689208 Size: MF
View Full Image


__________________
Master ASE Certified.L1 Advanced Engine Performance Certified.Pa Emission Repair Technician.Just Answer Car Category Mentor.
PictureDavo  -- Master technician -- 100% Positive Feedback on 1860 Car Accepts
ASE Master Technician/Advanced Automotive Diagnostic Technician
Reply to Davo
Sent August 19, 2006 12:07 p.m. (2 minutes and 45 seconds later)
Dave:

It is great to find someone who can help.

Do you happen to know if the 2007 Escalade taillight assembly will fit in the 2007 GMC Yukon Denali?

Butch Matthews
Customer (name blocked for privacy)
Answer
August 19, 2006 12:10 p.m. (3 minutes and 2 seconds later) 		ACCEPTED Check Mark
No I don't have that info.If I did I would give it to you.You would have to call a dealer that has Caddy and GMC to try to find that out.The part numbers would be different so a test fit would be needed.

__________________
Master ASE Certified.L1 Advanced Engine Performance Certified.Pa Emission Repair Technician.Just Answer Car Category Mentor.
PictureDavo  -- Master technician -- 100% Positive Feedback on 1860 Car Accepts
ASE Master Technician/Advanced Automotive Diagnostic Technician
Reply to Davo
Sent August 19, 2006 12:11 p.m. (1 minute and 7 seconds later)
Thanks again! I appreciate your assistance.
Customer (name blocked for privacy)
Answer
August 19, 2006 12:14 p.m. (2 minutes and 33 seconds later) 		ACCEPTED Check Mark
No problem I wish I had the answer about the tail lights.I'm not a parts guy.I just fix the vehicles but I'm learning the parts computer so in the future who knows.

__________________
Master ASE Certified.L1 Advanced Engine Performance Certified.Pa Emission Repair Technician.Just Answer Car Category Mentor.
PictureDavo  -- Master technician -- 100% Positive Feedback on 1860 Car Accepts
ASE Master Technician/Advanced Automotive Diagnostic Technician

Think you can answer this question?
 Login or  Become an Expert









DISCLAIMER: You acknowledge that any information you may obtain from individuals you contact through use of the Just Answer service comes from those individuals, not from Just Answer!, and that Just Answer is not in any way responsible for any of the information these third parties may supply. The site and services are provided "as is" with no warranty and no representations are made regarding the qualification of an Expert. Responses and comments on Just Answer! are for general information and are not intended to substitute for informed professional advice (such as medical, legal, investment or accounting) and do not establish a professional-client relationship. Just Answer! is not intended or designed to address EMERGENCY QUESTIONS which should be directed immediately by telephone or in-person to qualified professionals. Please carefully read the Terms of Service.
   Just Answer! > Car Questions & Auto Repair Information > Gmc Questions
Question List - Become an Expert - Terms of Service - Security & Privacy - About Us
© 2008 Just Answer Corp.