The cable is probably damaged, as they do get frayed or stretched. It wraps around the small Pulleys located top & Bottom of window Regulator. If you are able to succeed in putting cable back on, it will come off again, due to the tension created in Up or Down movement. I have done this a fewe times & it isn't worth the aggrevation.
Images available only to Customers.
The power window motor cannot be serviced. Replace the power window motor as a unit with the regulator.
Removal Procedure
- Raise and support the window glass.
- Remove the trim panel.
- Remove the water deflector.
- Disconnect the harness from the electric window motor assembly.
- Remove the 2 bolts holding the glass to the regulator.
- Remove the bolts from the window regulator.
- Remove the window regulator assembly from the door folding both sides together.
Installation Procedure
- Install the regulator to the door.
- Install the bolts to the window regulator. Tighten Tighten the bolts to 9 N.m (80 lb in) .
- Align the window glass to the regulator and install the bolts holding the glass to the regulator. Tighten Tighten the bolts to 9 N.m (80 lb in) .
- Connect the harness to the electric window motor assembly.
- Install the water deflector.
- Install the trim panel.
- Lower the window. Inspect the operation.
