Ask Your Car Question. Car Experts Answer You ASAP.

(Not a Car Question?)

Need to take off inside door panel of 92' Camry so I can fix the win

Sent to Car Experts September 09 12:36 PM

I can't get the inside door panel off my 92' Toyota Camry. I can't get off the handle that opens the door . I see no screws or clips. can you advise? Thanks.
XXXXX@XXXXXX.XXX

 

Optional Information:
1992 Toyota camry v6 le

Already Tried:
I have the panel almost off. I don't know how to get the handle off.

Customer (name blocked for privacy)
Answer
September 9 2:05 PM (1 hour and 29 minutes and 2 seconds later)
         
REPLIEDCheck Mark

1983-86 MODELS

See Figure 2

  1. Remove the inside door handle bezel and the armrest.

  2. On vehicles not equipped with power windows, place a soft cloth under the window and pull upwards on the cloth to release the snapring. Remove the regulator handle.

Images available only to Customers.


Fig. 2: Slide a piece of cloth under the door window handle and push up to release the snapring


  1. On manual mirrors, remove the setting screw and knob. Tape the end of a thin screwdriver or a trim removal tool and pry the retainer loose to remove the cover.

  2. Push on the center of the clip with a thin object to remove it.

  3. Tape the end of a thin bladed tool use a trim removal tool, then insert it between the door panel and door. Slide the tool until you hit a retaining pin, then, carefully, pry the pin out of the door. Do this with each pin until the panel is free. On vehicles equipped with power windows, disconnect the electrical wiring after the panel is free.

To install:

  1. On vehicles equipped with electric windows, connect the electrical wiring.

  2. Align the door trim retainer with the body and tap it in by hand.

  3. Install the center clip into the trim panel and push the clip in until it locks.

  4. Install the rear view mirror cover and retainer. On manual mirrors, install the knob and setting screw.

  5. With the door window fully closed, install the window regulator and handle.

  6. Install the door inside handle bezel and armrest.




Master ASE Certified.L1 Advanced Engine Performance Certified.Pa Emission Repair Technician.Just Answer Car Category Mentor.
Reply
September 9 2:21 PM (15 minutes and 28 seconds later)
         
Reply to Davo's Post: 1st , it says 83-86 models with your explanation. This is 1992 as I said. 2nd, I asked how to get the door handle off. All you tell me is to take it off. You do not explain how. I'm sorry, but I cannot accept this answer. It does nothing for me. It does not help at all. I am in the same position.
Answer
September 9 2:34 PM (13 minutes and 4 seconds later)
         
THIS ANSWER IS LOCKED!
You can view this answer by clicking here to Register or Login and paying $3.
Think you can answer this question?
Login or Become an Expert

 

DISCLAIMER: You acknowledge that any information you may obtain from individuals you contact through use of the JustAnswer service comes from those individuals, not from JustAnswer, and that JustAnswer is not in any way responsible for any of the information these third parties may supply. The site and services are provided "as is" with no warranty and no representations are made regarding the qualification of an Expert. Responses and comments on JustAnswer are for general information and are not intended to substitute for informed professional advice (such as medical, legal, investment or accounting) and do not establish a professional-client relationship. JustAnswer is not intended or designed to address EMERGENCY QUESTIONS which should be directed immediately by telephone or in-person to qualified professionals. Please carefully read the Terms of Service.

JustAnswer > Car Repair