- Just Answer


Ask A Question - Help - Register - Login

Sent to August 07, 2006 7:39 p.m.

I NEED TO INSALL A MANUAL OIL PRESSURE GAUGE IN MY 2003 DODGE VAN. THE MOTOR SIZE IS A 318 WITH INJECTION. WHERE DO I INSTALL THE FITTINGS FOR THE GAUGE?

Guests

Status: Value: $0

Answer
August 07, 2006 8:32 p.m. (53 minutes and 16 seconds later)

You will need to install a t fitting at the oil pressure sending unit, remove the oil pressure sending unit, install the t-fitting in the sending unit hole,install the oil line that goes to the gauge in one side of the t- fitting and then the oil pressure sending unit in the other side of the t-fitting. Use shrink tape on all threads

__________________
If i have been helpful,please click accept.
If you need further assistance just ask and i'll be glad to help

GENE_ADAMS25

Think you can answer this question?
Login or Become an Expert

	DISCLAIMER: You acknowledge that any information you may obtain from individuals you contact through use of the Just Answer service comes from those individuals, not from Just Answer!, and that Just Answer is not in any way responsible for any of the information these third parties may supply. The site and services are provided "as is" with no warranty and no representations are made regarding the qualification of an Expert. Responses and comments on Just Answer! are for general information and are not intended to substitute for informed professional advice (such as medical, legal, investment or accounting) and do not establish a professional-client relationship. Just Answer! is not intended or designed to address EMERGENCY QUESTIONS which should be directed immediately by telephone or in-person to qualified professionals. Please carefully read the Terms of Service.