Just Answer Just Answer
Ask A Question  -  Help  -  Register  -  Login   

Ask Your Car Question. Car Experts Answer You ASAP
(Not a Car Question?)

Question

How do I remove the driver side door panel on a 1998 ...


Sent to Car Experts August 01, 2006 7:27 a.m.
How do I remove the driver side door panel on a 1998 Pontiac Grand Prix GT?

Optional Information:
1998 Pontiac Grand Prix GT 6 cyl

Already Tried:
Nothing!
Customer (name blocked for privacy)
Status: Closed   Value: $15   
Reply
Sent August 02, 2006 9:39 a.m. (1 day and 2 hours later)
Relist: No answer yet.
Customer (name blocked for privacy)
Reply
Sent August 02, 2006 12:39 p.m. (2 hours and 59 minutes later)
Relist: No answer yet.
Customer (name blocked for privacy)
Answer
August 02, 2006 1:23 p.m. (43 minutes and 57 seconds later) 		ACCEPTED Check Mark

Hello

See if this helps

1996-98 VehiclesSee Figure 15

Click image to see an enlarged view
View Full Image
Fig. 15: Door panel mounting detail


  1. Disconnect the negative battery cable for safety purposes.

  2. Remove the front upper trim panel. Pry at the side of the panel to disengage the tabs, and carefully pull rearward.

  3. Remove the power door lock/window switch from the door panel. After removing any screws, carefully pry upwards on the switch bezel, and unplug the electrical connectors.

  4. Disengage the manual lock knob by pulling outward to disengage it from the rod.

  5. Remove the door inside handle escutcheon.

  6. Carefully pry the reflector from the door panel.

  7. If equipped, remove the window regulator handle. Refer to the illustration.

  8. Remove all screws from the door panel, including those behind the reflector, and under the armrest.

  9. Using a suitable tool, disengage the door panel clips from the door.

  10. Carefully remove the door panel from the vehicle.

To install:

  1. Note the relationship of the hooks and clips on the door panel. Carefully place the door panel on the door, making sure the upper and lower hooks are engaged.

  2. Press inward on the clips on the door panel, making sure they snap into position.

  3. Install all screws to the door panel, including those behind the reflector, and under the armrest.

  4. If equipped, install the window regulator handle.

  5. Snap the reflector onto the door panel.

  6. Install the door inside handle escutcheon.

  7. Engage the manual lock knob.

  8. Plug in the window switch/door lock panel, and snap it into position on the door panel. Install any retaining screws.

  9. Install the front upper trim panel.

  10. Connect the negative battery cable.



__________________
If this helps PLEASE hit the ACCEPT button and Please Give POSITIVE FEEDBACK!! BONUSES WELCOMED!Thanks
PictureMechanicMan  -- Master Auto Tech -- 98% Positive Feedback on 660 Car Accepts
Master Auto Technician 28yrs Electrical and Mechanical experience

Think you can answer this question?
 Login or  Become an Expert









DISCLAIMER: You acknowledge that any information you may obtain from individuals you contact through use of the Just Answer service comes from those individuals, not from Just Answer!, and that Just Answer is not in any way responsible for any of the information these third parties may supply. The site and services are provided "as is" with no warranty and no representations are made regarding the qualification of an Expert. Responses and comments on Just Answer! are for general information and are not intended to substitute for informed professional advice (such as medical, legal, investment or accounting) and do not establish a professional-client relationship. Just Answer! is not intended or designed to address EMERGENCY QUESTIONS which should be directed immediately by telephone or in-person to qualified professionals. Please carefully read the Terms of Service.
   Just Answer! > Car Repair > For Questions
Question List - Become an Expert - Terms of Service - Security & Privacy - About Us
© 2008 Just Answer Corp.