Ask Your Car Question. Car Experts Answer You ASAP.

(Not a Car Question?)

2001 Aztek -- A month ago I corrected a fuel vapor ...
Sent to Car Experts March 17 12:52 PM

2001 Aztek -- A month ago I corrected a fuel vapor emmision system fault. Now my OBD II scanner won't read anything at all. The power pin on the plug-in is dead, but it wasn't before the fix. All pertinent fuses are OK. I've read that after a correction a "drive cycle" must be accomplished before the diagnostics start working again. Is there a specific "drive cycle" for the Aztek

Customer (name blocked for privacy)
Answer
March 17 5:07 PM (4 hours and 15 minutes and 24 seconds later)
         
ACCEPTEDCheck Mark
Replace the fuse in the underhood fuse box marked FRT AUX.It will be a 20 amp fuse.Make sure your cigar lighter is pulled and your cell phone charger if you have one before replacing the fuse.


Master ASE Certified.L1 Advanced Engine Performance Certified.Pa Emission Repair Technician.Just Answer Car Category Mentor.
Think you can answer this question?
Login or Become an Expert

 

DISCLAIMER: You acknowledge that any information you may obtain from individuals you contact through use of the Just Answer service comes from those individuals, not from Just Answer!, and that Just Answer is not in any way responsible for any of the information these third parties may supply. The site and services are provided "as is" with no warranty and no representations are made regarding the qualification of an Expert. Responses and comments on Just Answer! are for general information and are not intended to substitute for informed professional advice (such as medical, legal, investment or accounting) and do not establish a professional-client relationship. Just Answer! is not intended or designed to address EMERGENCY QUESTIONS which should be directed immediately by telephone or in-person to qualified professionals. Please carefully read the Terms of Service.

Just Answer! > Car Repair