Hope this helps. Please click accept for me. ThanksImages available only to Customers.
This is a diagram of the system. The pcm controls the heater. If you can command it on all the circuits have to be good. It may be the controller causing this problem. Also make sure it is cold enough for them to come on. They do not always. Also the pcm monitors all the circuits for the heaters and will usually set code if there is a fault.
Images available only to Customers.
Edited by tactgear1 on March 14 2006 at 12:03 AM
PLEASE -Remember that your Expert will not be paid until you accept an answer and complete the process. Please leave "FEED BACK".