interior Monitoring System, Description
The interior monitoring system is an integral part of the anti-theft alarm system. The systems consists of two sensors into which the reading lights are integrated. Setting the operating mode of the reading lights is performed on each of the sensors separately.
The interior sensors work on the ultrasonic wave principle. The alarm of the anti-theft alarm system will be triggered if movement is detected in the interior when the system is active.
The interior sensors can be switched off via a switch in the B pillar/door sill and via the adaptation (function 10, channel number 05). To do this the ignition key must be withdrawn from the ignition switch, then operate switch and lock the vehicle.
The sensors will be switched on again the next time the vehicle is unlocked.
A waiting time of at least 30 seconds must be observed before commencing tests when the vehicle is locked.
|
|||||||||
 |
|
||||||||||||||||||||||||||
|
DISCLAIMER: You acknowledge that any information you may obtain from individuals you contact through use of the Just Answer service comes from those individuals, not from Just Answer!, and that Just Answer is not in any way responsible for any of the information these third parties may supply. The site and services are provided "as is" with no warranty and no representations are made regarding the qualification of an Expert. Responses and comments on Just Answer! are for general information and are not intended to substitute for informed professional advice (such as medical, legal, investment or accounting) and do not establish a professional-client relationship. Just Answer! is not intended or designed to address EMERGENCY QUESTIONS which should be directed immediately by telephone or in-person to qualified professionals. Please carefully read the Terms of Service. |
|
| ||
|
|
|
Question List - Become an Expert - Terms of Service - Security & Privacy - About Us
© 2008 Just Answer Corp. |
|