Just Answer Just Answer
Ask A Question  -  Help  -  Register  -  Login   

Ask Your Car Question. Car Experts Answer You ASAP
(Not a Car Question?)

Question

I have a 1990 Chev Pick up 4x4 8 cyl 350 a/c auto trans .I ...


Sent to Car Experts November 03, 2005 6:19 a.m.
I have a 1990 Chev Pick up 4x4 8 cyl 350 a/c auto trans .I had a intake manifold gasket replaced and when I got my truck back it sounded like the lifters were clacking.it never sounded like that before so I imeadiately went to the check to see if it was in time . I can't see the 0 deg mark on the tinimg flag and need to know where it is located. I knoe that on the firewall there is a wire to disconnect to set the timing at 0 deg which I did , there is also a round tube on the timing mark flag which I was told is where 0 deg is , I just need to know that this is correct or if it isn't where on the flag should I set it. Also now since the repair has been made to the intake gaskets I have Check engine soon light up , what would cause this once again it was not there before the repair was made.My oil pressure when driving at a sustained speed also it a little different it stays at about 15 psi when it is warm , seems to be ok to me but I thought my oil pressure was a little higher.

Optional Information: 1990 Chevrolet PU 1500 350
Already Tried:
I set the timing to be close to tube on timing mark flag.
Customer (name blocked for privacy)
Status: Closed   Value: $5   
Answer
November 03, 2005 7:04 a.m. (45 minutes and 10 seconds later)
THIS ANSWER IS LOCKED!
You can view this answer by clicking here to Register or Login and paying $3.
PictureDavo  -- Master technician -- 100% Positive Feedback on 1857 Car Accepts
ASE Master Technician/Advanced Automotive Diagnostic Technician

Think you can answer this question?
 Login or  Become an Expert









DISCLAIMER: You acknowledge that any information you may obtain from individuals you contact through use of the Just Answer service comes from those individuals, not from Just Answer!, and that Just Answer is not in any way responsible for any of the information these third parties may supply. The site and services are provided "as is" with no warranty and no representations are made regarding the qualification of an Expert. Responses and comments on Just Answer! are for general information and are not intended to substitute for informed professional advice (such as medical, legal, investment or accounting) and do not establish a professional-client relationship. Just Answer! is not intended or designed to address EMERGENCY QUESTIONS which should be directed immediately by telephone or in-person to qualified professionals. Please carefully read the Terms of Service.
   Just Answer! > Car Questions & Auto Repair Information > For Questions
Question List - Become an Expert - Terms of Service - Security & Privacy - About Us
© 2008 Just Answer Corp.