This could be caused by a vacum leak causing the mixture to be too lean to start. I would check all vacum lines and rubber caps on vacumm ports for cracks and to make sure all are connected. If this isn't the problem use a propane tourch with out flame and go around the intake area with engine running . If the rpm picks up at a certian point you have a vacumm leak there.
Hope this helps, if so an accept would be appreciated.
Edited by FirstHogman on September 13 2005 at 11:56 AM
If more information is needed, please ask me.
Hope this helps, an accept would be appreciated.
Firsthogman
Love them Harley's