-
Images available only to Customers.
Fig. 4: Clean all dirt or corrosion from the differential housing and cover in order to prevent contamination
Images available only to Customers.
Fig. 5: Loosen and remove the cover retaining bolts, then carefully break the gasket seal allowing oil to drain
Images available only to Customers.
Fig. 6: Once the fluid has drained, remove the cover from the differential housing
Images available only to Customers.
Fig. 7: Loosen pinion shaft lockscrew
Images available only to Customers.
Fig. 8: Remove the lock screw in order to free the pinion shaft
Images available only to Customers.
Fig. 9: Once the shaft is freed, withdraw it from the differential
Images available only to Customers.
Fig. 10: Remove the C-lock in order to free the axle shaft
Images available only to Customers.
Fig. 11: Remove the shaft by pulling it straight back and from the housing tube
Images available only to Customers.
Fig. 12: If necessary, remove the old seal using a prybar, but be careful not to damage the sealing surface
Images available only to Customers.
Fig. 13: Install a new seal using a suitable installation tool or driver
If I was helpful, please click the ACCEPT
button.