youre on the right track there. since the cables and guages are good, the gear that drives them will be malfunctioning. before you start taking things apart, i would suggest the test you have done at the guage side of the cable (just turn by hand as to not damage the cable) if it turns easily then there is problems with the driving gears inside the corresponding component. (this will most likely be the case) ensure that the cable's driving gear is contacting the cable's driven gear. if good, then ensure that the gears in the components in question are spinning as needed(if you can access them try to spin the gear by hand) you should not be able to turn them under normal conditions without moving the next gear or dirving component.
If you still need help just reply We're here to help you!
You already placed the deposit, please don't forget to click
Accept
Bonuses and positive feedbacks make my day